Electrical Engineering

Document Title Category Description
Transmission Line Design - general International practice
Transmission Line Design ‐ Tasks Involved • Route Selection • References (Standards)/Codes • Easements • Structures • Conductors • Structure Spotting • Corona ( ) Noise) • Electric/Magnetic Fields (EMF)
Typical Weight of 66kV /132kV / 220KkV S/C & D/C Transmission Line Towers (...
Typical weights of high voltage (HV / EHV) power transmission towers. Given for academic interest only and not for commercial purpose. May be used for estimation / bidding purpose.
Conceptual Survey of Generators and Power Electronics for Wind Turbines
This report presents a survey on generator concepts and power electronic concepts for wind turbines.
Busduct - Design and Selection Criteria
The Busduct provides a means for carrying high current. It ensures not only alternative to cumbersome cable system but also provides high system reliability.
Engine Control Module (ECM), Aftertreatment Control Module (ACM), Electrical...
Multiple electronic control units (ECUs) are used; the engine control module (ECM), instrument control module (ICM), Vehicle Electronic Control Unit (VECU), transmission control module (TCM), the gear selector control module (GSCM) and the aftertreatment control module (ACM).
Rapport Technique - Technical Report
Probabilistic methods are recommended for the design of transmission lines as opposed to deterministic methods because they openly acknowledge that in practice there is always some risk that design loads can be exceeded and as a result complete reliability cannot be achieved.
Design and Construction Of Sub Transmission, Distribution Lines and Sub-...
Design aspects Power Distribution System is governed by Indian Electricity Rules.
Collaborative Modeling And Decision-Making For Complex Energy Systems, Ali...
The central idea of this book is that complex energy planning processes are improved through a collaborative modeling and decision-making approach.
Resistive Capacitive Voltage Transformers For Power Quality Applications
Power quality has become a major concern for both, electricity providers and their customers. Today‘s electrical equipment is far more sensitive than the electrical devices of the past. Power disturbances results in customer dissatisfaction, load and revenue losses.
Sag-Tension Calculation Methods for Overhead Lines
Historically, for most overhead transmission lines, the sag of conductors (or tension) is measured at the time of construction when the line is not energized.
Steam Turbine, Mohammad Shoeb Siddiqui
A Steam Turbine is a device that extracts Thermal Energy from pressurized Steam and uses it to do Mechanical Energy on a rotating output shaft. Steam Turbine is device where Kinetic Energy (Heat) converted into Mechanical Energy (in shape of rotation).
Network Technical Code and Network Planning Criteria
Transmission and distribution networks owned by Power and Water cover the major centres of the Northern Territory. The legislated Third Party Access regime gives rights to private Generators and load customers to use the networks to enable contracted trade between Generator Users and Customer Users.
The Electrical Engineering Handbook, Sensors, Nanoscience, Biomedical...
The purpose of The Electrical Engineering Handbook, 3rd Edition is to provide a ready reference for the practicing engineer in industry, government, and academia, as well as aid students of engineering.The purpose of this volume (Sensors, Nanoscience, Biomedical Engineering, and Instruments) is to p
A606 Transmission Manual
The 42LE four speed transaxle has many similarities to the A-604. Both units are fully electronic controlled. The 42LE is mounted in the vehicle in the same fashion as rear drive transmissions. That is Longitudinally, whereas the A-604 is transverse mounted.
Transmission Line Setting Calculations − Beyond the Cookbook, Michael J....
Protection must be reliable for - Loss of any single element or component (N − 1), High-probability double contingencies (N − 2), Some conditions are alternate normal, not contingencies, You must identify contingencies appropriate for check at hand.
Smart Grid implementation in Transmission System
Smart grid is integration of an electric grid, communication network , software and hardware to monitor, control and manage the creation, distribution, storage and consumption of energy. The vision can be expressed in terms of it’s values, characteristics and milestones to achieve.
Electronic Transmission Control - 2004
The drivetrain is designed to transfer the energy generated by the engine to the wheels of the vehicle with the minimum possible loss of energy. To do this, the drivetrain components – engine, transmission, clutch, and brakes – must be matched as well as possible.
6MW Solar Photovoltaic Power Plant
Earthing Design Calculation for 33 KV Substation. The grid resistance is less than 1 ohms. Hence the design value of conductor size and length of conductor are adiquate and safe.
NETA - Arc-Flash Safety Handbook, Volume 2
This narrative provides information associated with arc flash labeling. It summarizes both current regulations and NFPA 70E criteria. Additionally, it provides recommendations associated with implementing this guidance within the industrial environment.
NETA - Transformer Handbook, Volume 2
Power transformers are the heart of every electrical transmission and distribution system. the concept was first conceived and developed in the late 1800’s by Faraday, Maxwell, and Tesla, and put into common practice by the likes of Edison and Westinghouse.

Pages