You are here

Document Title Category Description
Machinery for Wind Turbines - 2016
This DNV GL standard provides principles, technical requirements and guidance for design and manufacturing of machinery components and structures for wind turbines onshore and offshore in order to maintain safety and function in ultimate and serviceability limit states.
Single Valve Steam Turbine Governor - Users Manual
This manual provides a product and application overview, installation instructions, hardware description, Human Machine Interface (HMI) operation instructions, configuration instructions, controller operation instructions, Modbus configuration instructions, and troubleshooting information for the S
From Turbine to Wind Farms - Technical Requirements and Spin-Off Products,...
Capturing wind energy has been widely employed for centuries – i.e. the traditional windmills of the Netherlands being a significant landscape element for centuries.
Turbine and Auxiliaries
All the Clearance shall be checked and recorded during disassembling and reassembling for future maintenance. Every crack, scratch, tear off is also recorded. Especially remained crack shall be exactly recorded for next overhaul observation.
The Optimization of Offshore Wind Turbine Towers Using Passive Tuned Mass...
Increasing energy demand and carbon emissions have driven the development of alternative energy solutions. One promising technology is wind energy. Wind energy technology developments has advanced substantially since the 1980s.
Gas Turbines Materials, Modeling and Performance, Gurrappa Injeti
This book presents current research in the area of gas turbines for different applications.
Aeroelastic Simulation of Wind Turbine Dynamics, Anders Ahlstrom
Horizontal axis wind turbines can experience significant time varying aerodynamic loads, potentially causing adverse effects on structures, mechanical components, and power production.
Secondary Flow Fields in Francis Turbines
Hydropower, and especially Francis turbines, for electricity production has a history of more than 100 years and has proved to be one of the most efficient ways of utilizing renewable energy for electricity production.
Turbine Maintenance Handbook
Operation of turbine with load is one of important section during the production of electric power.
Simulation Of Dynamic Drive Train Loads In A Wind Turbine
This dissertation describes the development of a consistent modelling approach to correctly describe the dynamic behaviour of a complex drive train in a wind turbine, focussing on the gearbox.
Gas Turbine Theory - Fifth Edition, H Conen, GFC Rogers, HIH Saravanamuttoo
Of the various •means of producing mechanical power the turbine is in many respects the most satisfactory. The absence of reciprocating and rubbing members means that balancing problems are few, that the lubricating oil consumption is exceptionally low, and that reliability can be high.
ME 6604 Gas Dynamics and Jet Propulsion
Define Mach number. (May/June 2015, May/June 2010, May/June 2008, Nov/Dec2007) - Mach number is defined as the ratio between the local fluid velocities to the velocity of sound. Mach number M=c/a. It is used for the analysis of compressible fluid flow problems.
Piling Handbook, 8th edition (Revised 2008)
Steel sheet piling is used in many types of temporary works and permanent structures. The sections are designed to provide the maximum strength and durability at the lowest possible weight consistent with good driving qualities.
Taurus 60 Generator Training Manual
There are many different types of turbines in use in the world today. Some forms are old, like the Waterwheel (hydraulic turbine) and Windmill. Others are of more recent origin, Steam Turbines date from the 19th century while Gas Turbines date from the 20th century.
PS Single Stage Horizontal Centrifugal Pump
Ruhrpumpen is an innovative and efficient centrifugal pump company that offers operators of Pump systems a wide range of quality products. Ruhrpumpen is a vertically integrated company with its own foundry, machine shop, pump manufacturing plants and service centers.
Steam Turbine Operation and Maintenance Instructions
This manual contains information on the operation and maintenance of steam turbine. The information has been prepared with the assumption that the O&M personnel have basic knowledge of power plant engineering and operation.
Welding Handbook
Operation and Maintenance Schedule of a Steam Turbine Plant, Kehinde Bolaji and...
Descriptions of Past Research - Boiler and Turbine Steam and Cycle Chemistry...
Design of an Alternative Hybrid Vertical Axis Wind Turbine

Pages

Notes & Documents

Share innovative documents on study and research with fellow professionals and students.